Product Description
Inside the box, you will find:
1 × Magnetic Phone Holder with Vacuum Suction Base
1 × Magnetic Metal Ring
1 × Black Adhesive Mounting Plate
1 × Cleaning Wipe
Strong Magnetic HoldVacuum Suction Lock System360° Adjustable Viewing AngleReusable & Washable Suction BaseCompatible with MagSafe and Non-MagSafe DevicesSuitable for Car, Office, Home, Kitchen, Gym, Mirror, Glass and Smooth Surfaces
For best performance:
✔ Clean the mounting surface thoroughly.
✔ Ensure the surface is smooth, flat and dry.
✔ Avoid textured, rough, dusty or porous surfaces.
✔ Use the included cleaning wipe before installation.
Recommended Surfaces:
GlassMirrorSmooth DashboardSmooth MetalTilesAcrylic SurfacesLaptop Back Panel
(For iPhone 12/13/14/15/16 Series and other MagSafe compatible devices)
Clean the mounting surface using the provided wipe.
Place the vacuum suction base firmly on the desired surface.
Rotate the locking ring towards the “TIGHT” position until firmly locked.
Adjust the holder to your preferred viewing angle.
Bring your MagSafe device close to the magnetic ring.
The phone will automatically attach to the holder.
Check stability before use.
Your device is now ready for hands-free viewing.
(For Android Phones and Non-MagSafe Smartphones)
Clean the back of your phone or phone case using the included cleaning wipe.
Peel off the adhesive backing from the included Metal Ring.
Carefully place the Metal Ring at the center of the phone case.
Press firmly for 30 seconds.
Allow the adhesive to bond properly.
Recommended waiting time: 24 hours before heavy usage.
Install the holder on the desired surface using the vacuum suction lock.
Attach your phone to the magnetic holder.
Your device is now ready for use.
The included Black Adhesive Plate is designed for surfaces where direct vacuum suction may not work effectively.
Examples:
Textured DashboardSlightly Curved DashboardRough Plastic SurfaceUneven Interior Surface
Clean the mounting area.Remove the protective film from the Adhesive Plate.Attach the plate firmly to the desired surface.Press for 30 seconds.Allow adhesive to bond for several hours.Attach the vacuum suction holder onto the smooth plate.
This provides a stable and smooth mounting area.
Possible Causes:
Dust or dirt on surfaceRough or textured surfaceLock not fully tightened
Solution:
Clean surface thoroughlyUse only smooth surfacesRotate locking ring completely to lock position
Possible Causes:
Metal Ring installed incorrectlyPhone case too thickMisaligned magnetic attachment
Solution:
Reposition metal ringUse a thinner phone caseEnsure center alignment
Possible Causes:
Metal Ring not centeredThick protective caseForeign particles between phone and holder
Solution:
Reinstall ring correctlyRemove thick caseClean contact surfaces
Possible Causes:
Dust accumulationDirty suction pad
Solution:
Remove holder.Wash suction pad with clean water.Allow to air dry completely.Reinstall and lock.
Do not install on airbags or airbag deployment zones.Do not use on cracked or damaged surfaces.Ensure proper installation before driving.Keep away from excessive heat and direct flame.Check holder stability periodically.
WIDE COMPATIBILITY – Supports I–Fone, Samsung & all smartphones
HOLDS HEAVY PHONES – Strong enough for large devices
POWERFUL MAGNETIC LOCK – Secure attachment every time
ADJUSTABLE VIEWING – 360° flexible rotation
PREMIUM FINISH DESIGN – Modern and durable build
PACKAGE CONTENTS Inside the BOX = 1 × Magnetic Phone Holder with Vacuum Suction Base, 1 × Magnetic Metal Ring, 1 × Black Adhesive Mounting Plate, 1 × Cleaning Wipe
1 Yer Waranty Of Magnetic Phone Holder
{Original} 360° Rotatable Magnetic Phone Holder with Vacuum Suction, Reusable Sticky Dashboard Mount, Foldable Mobile Stand for Car Desk & Wall Use 360 Degree Magnetic Phone Holder With 1 year warrnty Read More
